![SRNE MPPT Gen4 DM200 solar charge controller SRNE MPPT Gen4 DM200 solar charge controller](https://www.wattuneed.com/38730-large_default/srne-mppt-gen4-dm200-solar-charge-controller.jpg)
![SRNE MPPT Gen4 DM200 solar charge controller SRNE MPPT Gen4 DM200 solar charge controller](https://www.wattuneed.com/38731-large_default/srne-mppt-gen4-dm200-solar-charge-controller.jpg)
![SRNE MPPT Gen4 DM200 solar charge controller SRNE MPPT Gen4 DM200 solar charge controller](https://www.wattuneed.com/38732-large_default/srne-mppt-gen4-dm200-solar-charge-controller.jpg)
![SRNE MPPT Gen4 DM200 solar charge controller SRNE MPPT Gen4 DM200 solar charge controller](https://www.wattuneed.com/38730-slider_photo/srne-mppt-gen4-dm200-solar-charge-controller.jpg)
![SRNE MPPT Gen4 DM200 solar charge controller SRNE MPPT Gen4 DM200 solar charge controller](https://www.wattuneed.com/38731-slider_photo/srne-mppt-gen4-dm200-solar-charge-controller.jpg)
![SRNE MPPT Gen4 DM200 solar charge controller SRNE MPPT Gen4 DM200 solar charge controller](https://www.wattuneed.com/38732-slider_photo/srne-mppt-gen4-dm200-solar-charge-controller.jpg)
Gen4 intelligent MPPT solar charge controller with LED step-up driver
All-in-one, waterproof, constant-current MPPT charge controller.
Items | Values | Adjustable | Default |
Controller type |
: infrared remote control; W: wireless remote control 2.4G |
System voltage | 12V / 24V |
Lead-acid |
Static power consumption |
R : ≤10mA/12V; 5 mA/24V |
Type -W : |
; 15mA/24V |
Standby power consumption | ≤1 mA |
Charging current | 150mA~7000mA | √ | 330mA |
Charging voltage | 15V~75V |
Maximum charging power | 100W/12V ; |
000W/24V |
Charge conversion efficiency | 85%-96% (typical efficiency 95%) |
Charge current accuracy | ≤3%±30mA |
Intelligent power | High, Moderate, Low, Auto, USE, | |
No | √ | Medium |
Load working period |
Period + pre-dawn lighting |
Period adjustment range |
/ 10min |
Power adjustment range | 1% / 10% |
Maximum solar input power | 260W/12V ; |
20W/24V |
Maximum load current | 20 A |
Maximum solar input voltage | ≤ 100V |
MPPT tracking efficiency | >99% |
Load conversion efficiency | ||
8 LI overload voltage +2V; × 2, 24V system. | 16.0V |
Limited charging voltage | PB-15.5V ; Overload voltage LI +1V ; ×2, 24V system |
15.5V |
Equalizing charging voltage | PB-14.6V ; LI-No ; ×2, 24V system |
14.6V |
Charge equalization interval | 30 days |
30D |
Boost charge voltage (lead-acid) Charge voltage (lithium) | ||
.5V ~ 17.0V;×2,24V system | √ | 14.4V |
Floating charge voltage (lead-acid) Charge return voltage (lithium) | 8.5V ~ 17.0V;×2,24V system | √ | 13.8V |
Over-discharge voltage | ||
.5V ~ 17.0V;×2,24V system | √ | 11.0V |
Over-discharge feedback voltage | ||
.5V ~ 17.0V;×2.24V system | √ | 12.5V |
Temperature compensation coefficient | PB: -3.0mV/℃/2V; lithium battery: no compensation. |
ight control voltage | ~ 11V;×2, |
4V system | √ |
Light control delay | ||
~ 60min | √ | 10S |
High-temperature load |
√ | 65℃ |
Low-temperature load | |
~ -35℃ | √ |
Operating temperature |
~ +65℃ |
IP rating | IP67 |
Protections | Protection against reverse battery polarity |
protection against reverse polarity of the solar panel, protection against overvoltage of the solar panel, protection against overcharge and overdischarge of the lithium battery, protection against overheating by detection of overcharge of the lithium battery by the BMS, protection against open circuits and short circuits of the load. |
eight |
g |
Controller dimensions | 155 x 114.4 x 34 mm |
Controller mounting dimensions | 102 x 123 mm |
Mounting hole diameter | Φ 3.5 mm |