1
ZJBENY DC dual lightning arrester box 2 inputs and 1 output 1000V 32A
€237.93
Tax included
BHS-2/1
0768563819698
DC lightning arrest box
- 1000V DC
- 2 inputs, 1 output
- DC switch up to 1000V 32A
8 item(s) left in Stock!
Single DC lightning arrester box ZJBENY 1000V 32A
The DC BHS-2/1 enclosure with a voltage of 1000V is installed between the solar panels and the solar converter.
To protect the solar DC circuit from damage due to overcurrent or overvoltage, extend the life of the solar system and improve system safety.
Equipped with the most reliable DC components for maximum protection.
Dimensions (mm)
Schematic diagram
Characteristics
| General data | |
| Model number | BHS-2/1 |
| Entrance | 2 strings |
| Exit | 1 string |
| Maximum voltage | 1000V |
| Maximum DC short circuit current per input (Isc) | 15A (Editable) |
| Maximum output current | 32A |
| Case | BX-13 |
| Type of material | Polycarbonate/ABS |
| Degree of protection | IP65 |
| Degree of impact resistance | IK10 |
| Dimension | 292 x 220 x 120mm |
| Cable Input Input | PG09 Cable gland, 2.5-16mm |
| Output cable gland | PG21 2.5-16mm |
| DC switch-disconnector | BYT.2-32/BYS |
| Nominal isolation voltage | 1000V |
| Rated current | 32A |
| Category | DC21B/PV2 |
| Compliance with the standard | IEC 60947-3 |
| Certificate | UL, TUV,KEMA,SAA,CE |
| DA Lightning Arrester | BUD-40/3 |
| Maximum operating voltage (Ucpv) | 1000V |
| Compliance with the standard | EN 50539 Type 2 |
| Maximum discharge current | 40 KA |
| Certificate | TUV CE |
| DC fuse holder | BR-30 |
| Led | Yes |
| Rated operating voltage | 1000V |
| Fuse link | 10x38mm LITTEL 15A |
| Certificate | UL,CB,CE |
| Environment | |
| Operating temperature | -20°C~+60°C |
| Humidity | 99,00% |
| Altitude | 2000M |
| Installation | Wall mounting |
BHS-2/1
Specific References
New
