The Enphase Energy microinverter system increases energy production and reliability while simplifying the design, installation and management of photovoltaic systems.
Enphase's high-efficiency Enphase IQ 7+™ and Enphase IQ 7A™ microinverters are ready for Smart Grids. An integral part of the Enphase IQ system, the IQ 7+ and IQ 7A integrate seamlessly with the Envoy-S™ and Enphase Enlighten™ monitoring and analysis software. The IQ 7+ and IQ7A microinverters exceed the reliability and robustness standards set by previous generations of microinverters and undergo more than a million hours of load testing, enabling Enphase to offer an unrivalled warranty.
Easy to install
Lightweight and simple
Faster installation with improved, lightweight two-wire cabling
Productive and reliable
Optimized for all high-power modules
Over one million cumulative test hours
Class II double-insulated enclosure
Ready for Smart Grids
Meets complex grid requirements in terms of voltage management and decoupling frequency
Remote updates to meet changing grid constraints
Configurable for different grid profiles
Enphase IQ 7A microinverter
Enphase's seventh-generation microinverters are powered by our unique software-defined architecture, offering efficient design with a single hardware reference worldwide. The new IQ 7A completes the family with support for modules up to 450 W, targeting high-power residential and commercial solar applications. Like all Enphase IQ microinverters, the IQ 7A microinverter is powered by Enphase's unique software-defined architecture.
The Enphase IQ 7A microinverter with smart grid functionality is the high-power variant of the seventh-generation IQ platform, and is designed for 60-cell / 120-half-cell and 72-cell / 144-half-cell modules. Like the IQ 7 and IQ 7+ series, its polymer enclosure and revolutionary wiring system simplify installation.
Optimized for high-power 60-cell / 120-half-cell and 72-cell / 144-half-cell modules
Maximum output power: 366 VA @ 230 VAC
Recommended PV module input power: 295-450+ W
Power point search range (operating range): 18 V-58 V
96.5% EU efficiency
The Enphase microinverter range A solution for every type of installation
Main use Residential / tertiary
Project voltage 230/400V
Nominal output power 349 VA
Module compatibility
-
60-cell modules
-
120 half-cells and 72 cells
-
144 half-cells
Enphase MyEnlighten web application For Enphase system owners
With the Enphase MyEnlighten web application, you can track your energy production, monitor the smooth operation of your system and share your data with family and friends, all from a simple, user-friendly interface.
Enphase Enlighten mobile application For system owners
With the Enphase Enlighten mobile app, you can check the status of your system at a glance without going into detail, while monitoring the health and performance of your system and production per panel wherever you are. You can see overall energy production and per-panel energy data with a single click, as well as overviews of your energy consumption and storage (where applicable).
Get it from the App Store or Google Play Store.
Features
INPUT DATA (DC)
Enphase IQ 7A
Recommended module power (STC)
295 W - 460 W +
Module compatibility
60, 66 &
72 cells
Max DC input voltage
58 V
Operating voltage range
18 V - 58 V
Starting voltage min/max.
33
V / 58 V
DC
short-circuit current
max.
circuit DC max
15 A
DC port overvoltage class
II
DC port power supply with single failure
0
A
PV network
configuration
PV network
AC side protection requiring max 20A per branch circuit
OUTPUT
DATA
(AC)
Max. output power.
366
VA
Max. rated output power
349
VA
Rated voltage/voltage range (L-N)
230 V / 219-264 V
Maximum output current
1
.52 A
Rated frequency
50 Hz
Frequency range
45 - 55 Hz
Maximum number of units per 20A string
10 (Ph + N),
30 (3Ph + N)
Maximum number of units per cable
10 (Ph + N), 18 (3Ph + N)
Overvoltage protection class
III
AC port re-supply current
0
A
Fixed power factor
1
Power factor (adjustable)
0
,7 inductive to 0.7 capacitive
EFFICIENCY
@230
V
Efficiency EN 50530 (EU)
96,50%
MECHANICAL
DATA
Operating ambient temperature range
-40°C
to +65°C
Permissible relative humidity range
4% to 100% (condensation)
DC connector type
MC4 type
Dimensions (L x W x D)
212 x 175 x 30,2 mm (without bracket)
Weight
1
.08 kg
Cooling
Natural convection - no fan
Use in humid environments
Yes
Pollution
degree
3
Enclosure
Class II double insulation,
corrosion-resistant polymer housing
IP rating
Outdoor - IP67
FUNCTIONALITIES
Communication with the Enjoy-s
PLC (Power Line Communication)
Monitoring
Monitoring options Enlighten Manager and MyEnlighten compatible with Enpase Envoy-S
For further information on the nature of the review controls, as well as the possibility of contacting the author of the review please consult our Transparency Charter.
No inducements have been provided for these reviews
Reviews are published and kept for a period of five years
Reviews can not be modified: If a customer wishes to modify their review then they can do so by contacting Verified Reviews directly to remove the existing review and publish an amended one
The reasons for deletion of reviews are available here.
4.6 /5
Based on 11 customer reviews
1
0
2
0
3
0
4
0
5
1
Sort reviews by :
Anonymous customer published the 20/11/2022following an order made on 26/10/2022
5/5
bien fait, mais il ne donne pas la norme à mètre en fonctionne du pays
