Batterie lithium PowerBrick+ 48V 105Ah PB+48/105
€3,108.77
Tax included
PB+48/105
0768563817038
The PowerBrick+ 48V-105Ah Lithium-Ion battery is extremely safe, thanks to the use of cylindrical cells in Lithium Ferro Phosphate (LiFePO4 or LFP) technology.
Dimensions (mm): 500 x 280 x 217
Weight (Kg) : 37.5 Kg
PowerBrick+ 48V 105Ah lithium battery PB+48/105
The PowerBrick+ 48V-105Ah lithium-ion battery offers maximum safety thanks to the use of cylindrical cells in Lithium Ferro Phosphate (LiFePO4 or LFP) technology.
The PowerBrick 48V-105Ah incorporates an innovative control system (BMS) in its casing, ensuring a very high level of safety during use. The BMS constantly monitors and balances the battery cells, to protect the battery and extend its life. The BMS also protects the battery from mishandling: deep discharge, overcharging, etc.
The PowerBrick+ range has been designed to replace lead-acid batteries, offering quadruple the energy density for the same weight and size.
Thanks to its technology, the PowerBrick+ 48V-105Ah lithium battery can be installed in any position (upright, on its side or upside down).
The electrical parameters of the PowerBrick+ 48V-105Ah lithium battery are fully compatible with those of a 48V AGM lead-acid battery. In the vast majority of cases, the charging system can be retained unchanged, and no additional accessories are required for replacement.
Since a PowerBrick+ battery can be discharged to 100% of its capacity, a lead-acid AGM battery can be replaced by a PowerBrick+ with a capacity 2x lower than that of the lead-acid battery (e.g.: a PowerBrick+ 50Ah replaces a 100Ah AGM battery).
The PowerBrick+ 48V-105Ah lithium battery has a nominal voltage of 51.2V. It can be easily assembled in series (up to 4 batteries in series) and in parallel (up to 15 batteries).
The voltage of the final assembly can be 48V and up to 192V (for 4 packs assembled in series), which meets the needs of virtually all electrical applications for traction, solar or wind storage, servicing, robotics, carts, etc.
The battery is protected by a splash-proof, dust-proof ABS case (IP65).
PowerBrick+ products are lightweight, compact, high-performance and can be used for all types of applications. PowerBrick+ directly replaces old-generation batteries (VRLA, AGM or OPZ lead-acid batteries) in 48V, which are inefficient and harmful to the environment (use of heavy metals and complexity of recycling).
The PowerBrick+ range comes with a 2-year commercial warranty, extendable to 5 years.
Lithium LiFePo 105 Ah batteries
- Extremely long life: from 3,000 cycles to several tens of thousands
- Deep discharges possible (up to 100%)
- Completely safe Lithium Iron Phosphate technology (no risk of explosion or auto-ignition)
- BMS (Battery Management System) integrated into the case: maximises battery life AND safety
- No lead, no rare earths, no acid, no outgassing
- Calendar life > 10 years
- Excellent temperature resistance (-20°C to +60°C)
- Flexible system: up to 16 packs in parallel and 4 in series
- Constant power throughout discharge (low internal resistance)
- Very low Peukert losses (energy efficiency >98%)
- Very low self-discharge (<3% per month)
- No memory effect
- Weight savings >50% and 40% smaller footprint than lead-acid batteries
- Certification: CE, RoHS, UN 38.3
Key points
- 48V-105Ah battery pack in Lithium Iron Phosphate (LiFePO4 - LFP) technology
- Nominal voltage: 51.2V
- Stored energy: 5.38 kWh
- New high-performance sealed cylindrical cell
- 3000 cycles at 100% DoD @ 1C (see technical graphs)
- 4500 cycles at 80% DoD @ 1C (see technical graphs)
- 98% energy efficiency
- Weight : 37.5Kg
- Dimensions: 500mm x 239mm x 217mm
- Instantaneous peak discharge current: 500A ±50A (max 280mS)
- Continuous discharge current: 120A (6.15kW)
- Maximum discharge current (< 30s): 200A (10.24kW)
- Maximum charging current: 100A
- Total safety ensured by a BMS (Battery Management System) integrated into the casing
- Monitoring of cell current and voltage, temperature, cell balancing, etc.
- Intelligent balancing algorithm
- 100% maintenance-free
- Series connection from 48V to 192V (1 to 4 units in series)
- Parallel assembly of up to 16 units (48V-1680Ah / 86.0kWh)
- Robust design in an insulated, waterproof enclosure (IP65 protection rating)
- Operating temperature when charging: 0°C to +60°C
- Discharge operating temperature: -20°C to +60°C
- Waterproof ABS case (IP65)
- CE, RoHS and UN38.3 certification
- 2-year commercial warranty as standard, extendable to 5 years
Dimensions
Specifications
| Electrical | |
| Nominal tension | 51.2 V |
| Nominal capacity | 105 Ah |
| Energy | 5.38 Wh |
| Internal resistance | ≤ 50m |
| Number of cycles | >3000 cycles |
| Self-unloading | < 3% per month |
| energy efficiency | > 98% |
| CHARGE STANDARD | |
| Charge tension | 59.2 V - 0.4V |
| Charge mode | CC/CV: Constant Current / Constant Voltage |
| Standard charge current (Continuous maxi current) | 50 A / 100 A |
| BMS cut-off voltage | 59.2 V - 0.4V |
| STANDARD DISCHARGE | |
| Instant peak discharge current | 500 A - 50 A (max 280mS) |
| Continuous discharge current | 120 A (6.14 kW) |
| Maximum discharge current (< 30s) | 200 A (10.24 kW) |
| BMS cut-off voltage | 40 V |
| environment | |
| Charge temperature | 0C to 60C |
| Discharge temperature | -20C to 60C |
| Storage temperature | 0C to 50C -60±25% relative humidity |
| Protection IP | IP 66 |
| mechanics | |
| Cell type | prismatic |
| package | ABS |
| Dimensions (L x P x H) | 500 x 239 x 217 |
| weight | 37.5 kg |
| terminal | Bolt M8 |
PB+48/105
Data sheet
- Voltage
- 48V
- Technology
- Lithium
- Battery capacity
- 105 Ah
- Width
- 500 mm
- Height
- 217 mm
- Thickness
- 239 mm
- Load current
- 50 A
- Max. discharge current
- 200 A (10,24 kW)
- IP protection
- IP 66
- Weight
- 37,5 kg
- Video Youtube 1 - ID
- TSkV5tpVDq8
Specific References
New
