3
Victron SmartSolar MPPT RS 450|100 and 200 - insulated
€1,430.22
Tax included
SCC145110410
0768563819506
SmartSolar MPPT RS charge controllers are Victron solutions for large PV park systems connected in series and charging 48V DC battery farms. This product is ideal for large grid-connected or off-grid battery systems.
SmartSolar MPPT RS 450|100 and 450|200 - Insulated
Solar charge controller with ultra-fast Maximum Power Point Tracking (MPPT)
The MPPT RS SmartSolar is a 48 V solar charge controller with a PV input of up to 450 VDC, and an output of 100 A or 200 A. It is used in solar applications connected or not to the grid and requiring maximum battery charge power.
Multiple independent MPPT tracking entries
With multiple MPPT trackers, you can optimize the design of your solar panel for maximum performance on your specific location.
Isolated PV connections for added security
The complete galvanic isolation between the PV and battery connections provides additional security to the entire system.
Wide voltage range of MPPT
PV operating range of 80 – 450 VDC with a PV starting voltage of 120 VDC.
Lightweight, efficient and quiet
Thanks to high-frequency technology and a new design, this powerful charger weighs only 7.9 kg for the 100 A model. In addition, it has excellent efficiency, low standby consumption and very quiet operation.
Screen and Bluetooth
The screen reads the battery and controller settings. The same settings can be accessed from a smartphone or device with a Bluetooth function enabled. In addition, the Bluetooth function can also be used to configure the system and change settings using VictronConnect.
PV insulation resistance monitoring for peace of mind in case of higher voltages
The MPPT RS continuously monitors the PV fleet, and it can detect if there are failures that reduce the insulation of the panels to a dangerous level of safety.
VE. Can and EV port. Direct
Allows you to connect to a GX device for system monitoring, data logging, and remote firmware updates. VE. Can allows you to connect up to 25 units in parallel and synchronize their load.
I/O Connections
Connections for programmable relay, temperature probe, auxiliary digital input, and voltage probe. Remote input is compatible with Victron's smallBMS as well as other types of BMS with an "Authorize-to-load" signal.
Configuration and monitoring with VictronConnect...
The built-in Bluetooth Smart connection allows quick adjustment of settings and supervision.
The built-in 30-day history displays the individual performance of separate MPPT trackers.
Test the VictronConnect demo to see all the configurations and view options with sample data.
Characteristics
| SmartSolar MPPT RS isolated | 450|100 | 450|200 |
| CHARGER | ||
| Battery voltage | 381 | |
| Nominal charging current | 100 A | 200A |
| Maximum charging power | 5.8 kW at 57.6 V | 11.5 kW at 57.6 V |
| "Absorption" charging voltage | Default configuration: 57.6 V (adjustable) | |
| Float charging voltage | Default configuration: 55.2 V (adjustable) | |
| Programmable voltage range | Minimum: 36 V Maximum: 62 V | |
| Charging algorithm | Adaptive multi-step (adjustable) | |
| Battery temperature probe | Inclusive | |
| Maximum efficiency | 96% | |
| Self-consumption | 15 mA | |
| SOLAR | ||
| Maximum DC PV voltage | 450 V | |
| Boot voltage | 120 V | |
| MPPT operating voltage range | 80 – 450 V(1) | |
| Number of trackers | 2 | 4 |
| Max operational PV input current | 18 A per tracker | |
| PV short circuit current max. | 20 A per tracker | |
| Max DC output charging power. | 4000 W per locator 5760 W total | 4000 W per locator 11520 W total |
| Maximum capacity of the PV park per tracker | 7200 Wp (450 V x 20 A) (3) | |
| Failure level PV insulation | 100 kΩ> | |
| GENERAL | ||
| Synchronized parallel operation | Yes, up to 25 units with VE. CAN | |
| Programmable relay | Yes | |
| Protection | Pv reverse polarity Output short circuit Overheating | |
| Communication of data | EV port. Direct, Ve Port. Can and Bluetooth (6) | |
| Bluetooth frequency | 2402 – 2480 MHz | |
| Bluetooth power | 4 dBm | |
| Universal input port analog/digital | Yes, 2x | |
| Remote On/Off | Yes | |
| Operating temperature range | From - 40 to + 60 °C (cooling by fan) | |
| Humidity (non-condensing) | max 95% | |
| CASE | ||
| Material and color | Steel, blue RAL 5012 | |
| Degree of protection | IP21 | |
| Connecting the battery | M8 nuts | |
| PV input power terminals | 2,5... 16 mm2 | |
| Weight | 7.9 kg | 13.7 kg |
| Dimensions (h x w x d) in mm | 440 x 313 x 126 | 487 x 434 x 146 |
| STANDARDS | ||
| Security | EN-IEC 62109-1, EN-IEC 62109-2 | |
| Country of origin | Designed in the Netherlands, made in India. | |
SCC145110410
Specific References
New
View the trust certificate
- For further information on the nature of the review controls, as well as the possibility of contacting the author of the review please consult our Transparency Charter.
- No inducements have been provided for these reviews
- Reviews are published and kept for a period of five years
- Reviews can not be modified: If a customer wishes to modify their review then they can do so by contacting Verified Reviews directly to remove the existing review and publish an amended one
- The reasons for deletion of reviews are available here.
- 1
0 - 2 0
- 3 0
- 4 0
- 5 1
Sort reviews by :
