![Avasco Solar SolarSpeed south landscape configuration 3.0 Avasco Solar SolarSpeed south landscape configuration 3.0](https://www.wattuneed.com/40118-large_default/avasco-solar-solarspeed-configuration-east-west-landscape-30.jpg)
![Avasco Solar SolarSpeed south landscape configuration 3.0 Avasco Solar SolarSpeed south landscape configuration 3.0](https://www.wattuneed.com/40119-large_default/avasco-solar-solarspeed-configuration-east-west-landscape-30.jpg)
![Avasco Solar SolarSpeed south landscape configuration 3.0 Avasco Solar SolarSpeed south landscape configuration 3.0](https://www.wattuneed.com/40118-slider_photo/avasco-solar-solarspeed-configuration-east-west-landscape-30.jpg)
![Avasco Solar SolarSpeed south landscape configuration 3.0 Avasco Solar SolarSpeed south landscape configuration 3.0](https://www.wattuneed.com/40119-slider_photo/avasco-solar-solarspeed-configuration-east-west-landscape-30.jpg)
Avasco Solar SolarSpeed mounting system west/east landscape 3.0 configuration
This system is sold WITH fixing clamsn but without ballast and ballast conrières (to be defined according to your project)
This system is sold WITH fixing clamsn but without ballast and ballast conrières (to be defined according to your project)
Click here to access the products.
The SolarSpeed east-west system is available with a 12.5° inclination.
As standard, the SolarSpeed east-west system is recommended with an inclination of 12.5° and intervals of 2,300 mm. Further intervals are available upon request.
The east-west system is usually offered in landscape configuration, but it is also possible to install it in portrait configuration.
Depending on the width of panels used (>1,010 mm, 1,010-1,055 mm, 1,055-1,075 mm), a suitable structure can be proposed. This allows 60- or 72-cell panels to be used in an east-west system.
The fit&click frame is very easy to assemble. This has the advantage of making installation very simple and reducing assembly time.
The use of semi-pre-assembled base units not only reduces assembly time, but also the number of individual elements on the roof!
Thanks to its self-healing and robust properties, zinc-magnesium* steel is particularly suitable for situations that require significant long-term corrosion resistance.
(NOT INCLUDED in the basic system, to be defined according to the project)
Click here to access the products.
Outside an east-west installation, it is exclusively possible to place ballast using L-shaped profiles.
The central support prevents the deformation of the profiles, which are fixed with self-drilling screws.
The assembly of the base units using these L-profiles makes the installation even more robust.
(NOT INCLUDED in the basic system, to be defined according to the project)
Outside an east-west installation, it is imperative to use L-shaped profiles, but in the middle of the installation it is possible to use ballast supports, because the amount of ballast required is less.
Qty panels | Qty Square EAST-WEST 12.5° / 2350mm | Corner support 40mm | Rubbers start of line | Pegs for Rubber fasteners |
2 panels | 2 | 1 | 4 | 8 |
4 panels | 3 | 2 | 6 | 12 |
6 panels | 4 | 3 | 8 | 16 |
8 panels | 5 | 4 | 10 | 20 |
10 panels | 6 | 5 | 12 | 24 |
12panels | 7 | 6 | 14 | 28 |
14 panels | 8 | 7 | 16 | 32 |
16 panels | 9 | 8 | 18 | 36 |
18 panels | 10 | 9 | 20 | 40 |
20 panels | 11 | 10 | 22 | 44 |