![Victron SmartSolar MPPT 250V controller Victron SmartSolar MPPT 250V controller](https://www.wattuneed.com/7055-large_default/mppt-charge-controller-victron-smartsolar-250-60-to-250-100-with-screws-or-mc4-type.jpg)
![Victron SmartSolar MPPT 250V controller Victron SmartSolar MPPT 250V controller](https://www.wattuneed.com/7055-slider_photo/mppt-charge-controller-victron-smartsolar-250-60-to-250-100-with-screws-or-mc4-type.jpg)
Especially under cloudy skies, when light intensity is constantly changing, an ultra-fast MPPT controller will improve energy harvesting by up to 30% compared with PWM charge controllers, and by up to 10% compared with slower MPPT controllers.
Especially under cloudy skies, when light intensity is constantly changing, an ultra-fast MPPT controller will improve energy harvesting by up to 30% compared with PWM (pulse-width modulation) charge controllers, and by up to 10% compared with slower MPPT controllers.
Under shadowing conditions, two or more maximum power points may be present on the voltage-power curve. Conventional MPPTs tend to lock on to a local MPP which
not necessarily the optimum MPP. SmartSolar's innovative algorithm will always maximize energy recovery by locking on to the optimal MPP.
No fan. Maximum efficiency in excess of 98%.
Fully programmable charging algorithm (see the Software section of our website) and eight pre-programmed algorithms selectable with a rotary switch (see manual for details).
Protection against overheating and power reduction in case of high temperature.
Protection against reversed PV current.
Compensates for Float and Absorption charge voltages as a function of temperature.
The wireless solution for configuring, monitoring and updating the controller using Apple and Android phones, tablets or other devices.
For a wired data connection to a Color Control panel, PC or other devices.
For connection to a VE.BUS BMS, for example.
Can be programmed (e.g. with a Smartphone) to trigger an alarm, or other events.
Simply remove the rubber seal protecting the socket on the front of the controller, and insert the display.