![Follower photovoltaic 2 axes 16 panels Follower photovoltaic 2 axes 16 panels](https://www.wattuneed.com/25060-large_default/follower-photovoltaic-2-axes-16-panels.jpg)
![Follower photovoltaic 2 axes 16 panels Follower photovoltaic 2 axes 16 panels](https://www.wattuneed.com/25058-large_default/follower-photovoltaic-2-axes-16-panels.jpg)
![Follower photovoltaic 2 axes 16 panels Follower photovoltaic 2 axes 16 panels](https://www.wattuneed.com/25060-slider_photo/follower-photovoltaic-2-axes-16-panels.jpg)
![Follower photovoltaic 2 axes 16 panels Follower photovoltaic 2 axes 16 panels](https://www.wattuneed.com/25058-slider_photo/follower-photovoltaic-2-axes-16-panels.jpg)
This solar suiiveur can hold between 16 and 18 panels (depending on the size of the Panel) up to 25% extra performance against a South full installation
Manufactured on demand. Contact us for more information.
A solar Tracker allows you to maintain an optimal orientation of the panels compared to the rays of the Sun. This optimal orientation allows to maximize electricity from photovoltaic panels. This type of structure allows to increase electricity generation compared to the fixed panels:
25% increase compared with a plant in the South
40% increase compared with a plant in the East or West
• Automated two-axis Tracker System
• Hourly positioning and via brightness calculator
• Hot galvanized steel structure
• Suitable for all brands of photovoltaic panels
• Robustessse
• Performance
STS 16 | |
Width | 2 m |
Length | 2 m |
Depth | 1 m |
Volume | 4 m³ |
Weight | 9200 kg |
The structure has two degrees of freedom: a horizontal rotation to set azimuth and vertical rotation for tilt. The horizontal rotation allows to track the movement of the Sun throughout the day. The vertical rotation helps guide the structure according to the seasonal variation of the Sun.
Materials | Steel/Alu |
Surface | 26 m² |
The number of columns | 4 |
Number of lines | 4 |
Height of mast | 2 m |
Height panels | 4 m |
Total width | 6.6 m |
Total height | 4.1 m |
Power (panels 260Wc) | 4160Wc |
Annual production | 4800 Kwh |
Weight | 1000 kg |
Wind speed maximum eligible | 120 km/h |
Manufacturing | 100% Belgian |
Our solar Tracker has an automatic orientation of the panels according to the daily declination of the Sun (from East to West) throughout the day. This orientation takes place every 10 minutes through an electric motor. The orientation of the structure according to the seasonal variation of sunlight (orientation at 73 ° at the winter solstice to 27 ° at the summer solciste) is also automatic. The installed power is adjusted according to demand. A standard installation is of the order of 4kWc. The surface installed of PV panels is 25, 6 m².
Horizontal axis | 220 ° |
Vertical axis | 60 ° |
Operating voltage | 24 volt |
Engine power | 2 X 60W |
Consumption of operation | 200Wh/j |
Tracking system | Schedule +. brightness sensor |