Victron Orion DC-DC converters - without insulation
Victron Orion DC-DC converters without isolation - 12/24 Volts and 24/12 Volts.
Victron converters for safe transformation of system voltage into a stable voltage.
Several models available: to raise or lower the voltage.
Please select your model in the options.
"Victron Orion DC-DC converters without insulation".
Different models available
Models are available in "small " and "large" sizes.
SMALL POWER MODEL
- High-efficiency
Using synchronized rectification, full-load efficiency exceeds 95%.
- IP43 protection
If the box is oriented with the terminals facing downwards
- Terminal block
No special tools required for installation
HIGH-POWER MODEL
On-off remote connector
The remote on-off connector eliminates the need for a high-current switch on the input wiring. The remote on-off connector can be operated from a low-power switch or from a motor on/off switch (see manual).
All models with adjustable output can also be used as a battery charger.
For example, to charge a 12 V starter or service battery in a 24 V system.
All models with adjustable output can be installed in parallel to increase output current.
Up to five units can be connected in parallel.
Orion 12/27, 6-12: a 24 V battery charger
For charging a 24 V battery from a 12 V system. The output voltage of this model is set with a potentiometer.
A step-down/step-up regulator with a very wide input range: Orion 7-35/12-3
The Orion 7-35/12-3 isolated converter features a very wide input range. It is suitable for 12 V or 24 V systems, with a fixed output of 12.6 V.
Simple installation
Supplied with 4 insulated 6.3 mm Faston female connectors.