DPK Grundfos submersible drainage pump
€ 2.898,67
Inclusief belasting
DPK.20.100.110.5.0D
0768563818110
• Rated power - P2: 11 kW
• Supply frequency: 50 Hz
• Nominal voltage: 3 x 380-415 V
Submersible drainage pump
The Grundfos DPK pump is a submersible pump for drainage applications.
The pump has a semi-open wheel with a free passage of 20 mm and allows the pumping of large amount of infiltration water and drainage water surface water with high pressure.
The compact design makes the pump available for a fixed or temporary installation.
The pump is cast iron with a radial back-up hole and a fully closed three-phase F-insulation class (155oC) engine.
The pump is equipped with ipsothermic sensors in case of engine overheating and an electrode probe to detect water penetration inside the engine.
The pump has a double mechanical pad.
The pump is ready, either for a free installation or for a seating installation. It is equipped with 10 m of cable.
Size
Characteristics
| Commands | |
| Waterproofing probe | N |
| Liquid | |
| Pumped liquid | All Newtonian liquid |
| Liquid temperature range | 0...40oC |
| Density | 998.2 kg/m3 |
| Technical | |
| Actual diameter of the moving wheel | 185 mm |
| Type of mobile wheel | O |
| Maximum size of impurities | 20 mm |
| Primary topping | SIC |
| Secondary garnish | CERAMIC-CARBON |
| Max hydraulic efficiency. | 71,00% |
| Curve tolerance | NONE |
| Materials | |
| Pump body | Cast iron |
| Mobile wheel | EN1561 EN-GJL-200 Ductile Cast |
| Engine | EN1563 EN-GJS-450-10 Cast iron EN1561 EN-GJL-200 |
| Installation | |
| Maximum ambient temperature | 40oC |
| Pump-refoulement | DN 100 |
| Maximum installation depth | 25m |
| Electrical data | |
| Norminal-P2 Power | 11 kW |
| Feeding frequency | 50 Hz |
| Nominal tension | 3x380-415V |
| Tension tolerance | 5/-5% |
| Number max. Start-ups per hour | 30 |
| Nominal current | 8.4a |
| 3/4 charge rated current | 15.4A |
| Norminal Current 1/2 charge | 10.8A |
| Maximum intensity consumed | 23A |
| Cos phi-Power Factor | 0.92 |
| Cos phi-Power Factor at 3/4 charge | 0.91 |
| Cos phi-Power Factor at 1/2 charge | 0.87 |
| Nominal speed | 2850 minutes-1 |
| Full-load engine performance | 89.5% |
| 3/4-load engine efficiency | 90,00% |
| 1/2-load engine efficiency | 89.2% |
| Number of poles | 2 |
| Start-up method | Direct |
| Protection Index (IEC 34-5) | IP68 |
| Isolated class (IEC 85) | F |
| Explosion proof | Not |
| Length of cable | 10m |
| Cable type | PNCT |
Curves
DPK.20.100.110.5.0D
9999 Items
Specifieke referenties
- upc
- 768563818110
- ean13
- 0768563818110
Nieuw
